Symbols - PowerSmith PGT120 Manual Del Operador

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
V
Volts
A
Amperes
Hz
Hertz
W
Watts
.../min.
Per Minute
Alternating Current
Direct Current
Read the Operator's Manual
Wear Eye and Ear Protection
Safety Alert
keep Bystanders Away
Wet Conditions Alert
English

SYMBOLS

NAME
Voltage
Current
Frequency (cycles per second)
Power
Revolutions, strokes, surface speed, orbits etc., per minute
Type of current
Type of characteristic of current
To reduce the risk of injury, the user must read and under-
stand operator's manual before using this product
Always wear eye protection with side shields marked to
comply with ANSI Z87.1 along with hearing protection
when operating this equipment.
Precautions that concern your safety.
keep all bystanders at least 50 ft. away.
Do not expose to rain or use in damp locations
6
EXPLANATION