Expedition Pro Accessories - Samson Audio EXPEDITION PRO XP100 Manual Del Usuario

XP200/XP300 wireless compartment
(top view)
As shown in the illustration on the left, the top panel of the Expedition Pro XP200 and
XP300 provides a prewired compartment that accommodates any of three
ent Samson wireless receivers: the UM1 or M32 UHF models or the VM1 VHF model.
Output signal from a wireless receiver mounted in an XP300 arrives at channel 2 of the
onboard mixer.
In addition, a number of accessories are available from your local Samson dealer that
allow you to expand the capabilities of your Expedition Pro system. These include:
• The EX500 active subwoofer—the ideal complement to any Expedition Pro enclo-
sure (or to any loudspeaker system, for that matter)—pairs a powerful 500-watt
amplifier with a heavy-duty 15" low frequency driver in order to provide deep low
end response. A built-in stereo electronic crossover allows the EX500 to operate
either in mono or as a common subwoofer in a stereo system. It features an all-
steel grill and rigid corners, as well as an integral 1 3/8" pole-mount receptacle
• The RB 2030 rechargable battery cartridge, which provides up to two hours of
power to either the XP200 or XP300 from its dual Lead-Acid GelCel batteries.
• The MP 1030 mounting bracket, which allows any Expedition Pro enclosure to be
"flown" or mounted on the wall or ceiling using standard OmniMount
ware. For more information, see the "Positioning and Mounting the Expedition
Pro" section on page 12.
15
15

Expedition Pro Accessories

differ-
hard-