babymoov NutriSmart Manual De Instrucciones página 15

INTELLIGENT!
The NutriSmart automatically calculates the required heating time according to the heating
method, ml/g and required temperature. It memorises your latest programme settings! You
can alter these at any time using the arrows.
3 - HEATING BABY BOTTLES, CONTAINERS AND BREAST MILK POUCHES
• Whether you are using the steam heating method (1) (baby bottles/baby food jars) or bain-marie method (2) (breast milk/
defrosting), you will need to use the arrows (8) to specify:
: the amount of milk/food in your container (60 / 90 / 120 / 180 or 250) (4).
: the temperature of the container (5).
= room temperature: 20 °C.
= temperature having been refrigerated: 4 °C.
= frozen temperature approx. -18 °C (available for bain-marie mode only).
: heating time (this is pre-set according to the quantity and required temperature, but you can change it at any time) (3).
• To move between steps and confirm, simply press OK (6).
• To start the heating process once you have completed all the steps, press OK twice until you hear a beep (optional
programmable start, see part 4).
• The heating process is finished when you hear 3 beeps.
• To restart the heating process, press the top arrow and select your new programme.
• : if you do not take any action within 1 hour after heating, the bottle warmer will automatically go into standby.
• To deactivate the standby mode, press the OK button so that the bottle warmer turns back on and suggests the previously
used heating time. Press the OK button once again, and the product will start heating up.
Caution: the steam heating mode may cause splashes. Move away from the bottle warmer to avoid any risk of
scalding. Also always check the temperature of the milk/food before serving it to your child. Wait 15 mins between
each bottle or reduce your heating time.
Note: if the quantity to be heated is not pre-programmed, we recommend choosing the lower quantity to avoid
overheating.
1
3
4
5
6
8
NUTRISMART • Instructions for use
2
7
9
15