Troubleshooting - babymoov NutriSmart Manual De Instrucciones

Descaling:
• Do not use descaling products.
• After repeated use, and depending on the amount of water used, a layer of limescale may build up inside the tank.
• Descale the tank regularly to ensure the appliance works correctly. Note that the low water level indicator (9) lights up when
the appliance needs descaling.
• Descale the appliance as follows: mix 100 ml of hot water with 100 ml of white vinegar and pour the solution into the tank.
Leave for 30 minutes and empty the appliance. Clean with a damp cloth.
PROBLEMS
Does not heat up enough or not at all
Does not turn on
FOR USE AT HOME
20 °C
4 °C
20 °C
4 °C
-18 °C

TROUBLESHOOTING

POSSIBLE CAUSES
Limescale build-up
Water is too cold
Action not finalised
Start button badly positioned
Not plugged in properly
MEASUREMENTS CHART
ml minutes
60 1.25
90 1.40
120 2.15
180 2.20
250 2.40
60 2.25
90 2.40
120 3
180 3.40
250 4.20
60 7
90 11
120 12
180 12
250 15
60 10
90 12
120 13
180 26
250 28
60 26
90 32
120 33
180 35
250 40
NUTRISMART • Instructions for use
SOLUTION
See the "CARE GUIDE" section in the instruction
manual for how to descale the product.
Increase the heating time.
Check that the OK button has been pressed to confirm
the heating process.
Check that the start button is correctly activated: home
or car.
Check that the appliance is plugged in.
FOR USE IN THE CAR
20 °C
4 °C
20 °C
4 °C
ml minutes
60 5
90 6
120 7
180 9
250 11
60 8
90 11
120 14
180 18
250 25
60 9
90 12
120 10
180 12
250 17
60 16
90 20
120 25
180 30
250 40
17