Environmental Protection - wolfcraft FKS 115 Manual De Instrucciones

Sawing with the guide bar
• Fix the work piece to a plain and safe support. Now attach the guide bar with the 2 clamps to the work piece (Fig. 3).
• Then insert the sliding carriage into the guide bar (Fig. 4).
• Pull back the saw's protective pendulum hood. Align the saw's base plate with its 6 limit stops on the mounting plate.
In order to do so press the saw blade to the rubber lip. Make sure that the teeth of the saw blade touch the rubber lip,
so as to ensure parallel cuts and to protect the work piece from getting torn. Following that, tighten all six knurled
screws (Fig. 5). Caution: Use only hand-held circular saws for jobs within the above maximum dimensions of the base
plate and make a trial cut after each dimensional change.
• Always move the saw parallel to the guide bar when sawing. Switch off the saw after the cut has been completed.
The circular saw can now be removed from the mounting plate. Caution: Before attempting a cut, set your saw at such
a cutting depth that the saw blade does not protrude more than 3 mm from the bottom of your work piece.
You can process work pieces with a maximum width of 1,100 mm with the guide bar. Should the mounting carriage
have excessive clearance, it can be fine-tuned with the two setscrews (Fig. 6.1 - 6.3).
• Equipment dimensions (Fig. 7).
• Work pieces with a maximum width of 2,250 mm can be processed (Fig. 8) with the separately available accessories,
an extension set for the guide bar (article number 6911000).

Environmental protection

When disposing of your guide bar FKS 115 please observe the local disposal regulations.
Warranty
Dear hobbyist!
You have purchased a high-quality wolfcraft
wolfcraft ® appliances are built to high technical standards, and undergo intensive development and test phases before
leaving the factory. Constant controls and regular tests during their manufacture, ensure a high quality standard.
Sound technical developments, and reliable quality controls warrant for the right choice of appliance.
We provide a warranty of 10 years from the day of purchase on the wolfcraft
exclusively used for DIY purposes. The warranty only covers damage to the item purchased, and only such damage
that can be attributed to faulty material und poor workmanship. The warranty does not cover defects and damage that
must be attributed to improper use or insufficient maintenance. Nor does the warranty cover the usual wear and tear
as well as defects and damage, of which the customer has been aware when purchasing the equipment.
Warranty claims can only be asserted by producing the invoice or the till receipt.
The warranty granted by wolfcraft
withdrawal from the contract, price reduction, claims for damages or reimbursement of expenses).
Declaration of Conformity pursuant to Directive 2006/42/EC on Machinery, Annex II A
wolfcraft GmbH in D-56746 Kempenich, Wolff-Str. 1, hereby declares that this product (FKS 115) conforms to Directive
2006/42/EC on Machinery.
Kempenich, 03.04.2017
Thomas Wolff
Person authorized to sign the Declaration of Conformity and to compile the technical documentation.
(Management; wolfcraft GmbH)
® appliance, which we know you will enjoy using.
does not in any way restrict your statutory consumer rights (i.e. contract performance,
®
t
® product you acquired, provided it is
14