Ec Declaration Of Conformity - Sunex Tools SX8200 Manual Del Usuario

When using the tool, be careful not to exert excessive force.
Too much force could be hazardous if it causes the spindle to
bend or break.
NOTE: During operation, safety goggles should always be
worn to guard against flying debris (users and bystanders).

EC DECLARATION OF CONFORMITY

We, Sunex International Inc., 315 Hawkins Rd, Travelers Rest,
SC 29690, declare under our sole responsibility that the
product to which this declaration relates, is in conformity with
the requirements of the Council Directive of June 1998 on the
approximation of the laws of the Member States relating to
machinery. (EN792, 98/37/EC)
Harmonized Standards Applied:
EN 792-6
National Standards Applied:
ISO 8662-7, ISO 15744-2002
Machine Name:
SX8200 Surface Blaster
Serial No.:
TS012010 or higher
Techical Data:
Spindle Thread Size: 9mm
Free Speed: 4,000 RPM
Air Pressure: 90 psig (6.2 bar)
Noise and Vibration Declaration
Tool produces a noise level (no load) of 86 dBA sound pressure
with 3 dBA uncertainty per EN ISO15744-2002. Vibration level
is <0.5 m/s² tested per EN 28662-1 & EN28662-7:1997
Signature of Issuer:
Name and Position of Issuer: John Stratton, Product Manager
Sunex International Inc.
Date of Issue: January 4, 2012
Specifications
Spindle Thread Size ...................................................... 9mm
Free Speed .......................................................... 4,000 RPM
Length ..............................................................10" (254mm)
Weight ....................................................... 2.7 Lbs. (1.22 kg)
Avg. Air. Cons. .........................................3.5 cfm (99.1 l/min)
Air Inlet ................................................................... 1/4" NPT
Min. Hose Size ............................................ 3/8" I.D. (10mm)
SX8200: Parts Breakdown & Operating Manual 4 12/6/19