Personalisation; Setting The Temperature; Setting The Spin Speed - Ariston ARWL 129 Instrucciones De Uso

Personalisation

Setting the temperature

NA
By pressing the TEMPERATURE button to set the wash temperature. (See Table of wash cycles) Wash temperature can be
set selecting , "Cold", "Warm", "Hot" or 2 in-between positions which correspond to intermediate levels of water tempe-
rature (example: the position between "cold" and "warm" is lukewarm). See below for the indication in °C and °F for each
temperature position.
The available selections are:
•
• Cold
•
•
• Warm
•
•
• Hot

Setting the spin speed

Turn the SPIN SPEED knob to set the spin speed for the selected wash cycle.
The maximum spin speeds available for each wash cycle are as follows:
Wash cycles Maximum spin speed
Cottons 1200
Synthetics 800 rpm
Wool 600 rpm
Silk drain only
The spin speed may be lowered, or the spin cycle can be excluded altogether by selecting the symbol
The washing machine will automatically prevent you from selecting a spin speed which is higher than the maximum speed
set for each wash cycle.
Note: For the first two Programmes (Cottons Regular and Cottons Colored) the garments will be spun at maximum speed.
This allows to get the most from the spinning phase and reduce time and energy needed for the drying.
Functions
The various wash functions available with this washing machine will help to achieve the desired results, every time.
To activate the functions:
1. Press the button corresponding to the desired function;
2. the function is enabled when the corresponding indicator light is illuminated.
Note: If the indicator light flashes rapidly, this signals that this particular function may not be selected in conjunction with the
selected wash cycle.
Delay timer
This timer delays the start time of the wash cycle by up to 12 hours.
Press the button repeatedly until the indicator light corresponding to the desired delay time switches on. The fifth time the button
is pressed, the function will be disabled.
N.B. Once you have pressed the START/PAUSE button, the delay time may only be decreased if you wish to modify it.
!
This option is enabled with all programmes.
Reduced Wrinkles
By selecting this function, the wash and spin cycles will be modified in order to reduce the formation of creases. At the end
of the cycle the washing machine will perform slow rotations of the drum; the REDUCED WRINKLES indicator light will switch
on and the START/PAUSE indicator light will flash in an orange colour and the phase END will remain lit in a fixed manner.
To end the cycle, press the START/PAUSE button or the REDUCED WRINKLES button.
For the Silk/Curtains cycle, the machine will end the cycle while the laundry is soaking and the REDUCED WRINKLES indi-
cator light will flash. To drain the water so that the laundry may be removed, press the START/PAUSE button or the REDU-
CED WRINKLES button.
!
It may not be used with the 5, 8, 9, 10, 13, B, C.
10
Tap water
15 °C/ 59 °F
20 °C/ 68 °F
25 °C/ 77 °F
30 °C/ 86 °F
35 °C/ 95 °F
40 °C/ 104 °F
57 °C / 134 °F
rpm only
HOT COLD
WARM
.