Mi XMWTCL02 Manual De Usuario página 6

Charging
1. Place the watch on the charging dock. Make sure the contact points both on the
back of the watch and the charging dock are making contact with each other.
2. Connect the charging dock to a standard adapter at an output voltage of 5 V and an
output current of 0.5 A or higher.
Notes:
If the watch is unable to turn on after it has not been used for a while, it needs to be charged
●
for about 1 minute before the charging icon is displayed.
Wipe the watch's contact points clean before charging so as to avoid residual sweat or
●
moisture.
08
Specifications
Name: Mi Watch
Model: XMWTCL02
Device Name: Bluetooth Device
Display Screen: 1.39 inch AMOLED
Resolution: 454 × 454
Sensor: Heart rate sensor (including the function of measuring blood
oxygen levels), accelerometer, gyroscope, geomagnetic sensor,
barometric pressure sensor, ambient light sensor
Wireless Connectivity: Bluetooth 5.0 BLE
Battery Capacity: 420 mAh
Satellite Positioning: GPS & GLONASS
Compatible with: Android 4.4 & iOS 10 or above
Rated Input: 5 V 0.5 A
Item Dimensions: 45.9 × 53.35 × 11.8 mm (excluding strap and
protrusions)
09