Care & Cleaning
1. Switch the toaster off at the power outlet and
then remove the power plug from the power
outlet. Allow the toaster to cool completely
before cleaning.
2. To clean any crumbs from the toaster, remove
the crumb tray (located under the control panel
at the front of the toaster) by pulling it outwards.
Empty and replace the crumb tray before using
the toaster again. Replace the crumb tray by
sliding it inwards until it locks into position.
3. To remove any additional crumbs caught inside,
turn the toaster upside down over a bin and
shake gently to free the crumbs.
DO NOT bang the toaster, this may damage
the elements or carriage mechanism.
4. Wipe the outside of the toaster with a slightly
dampened soft cloth and then dry it with a soft
dry cloth to dry completely.
NOTE
Do not clean with metal scouring pads.
Pieces can break off the pad and touch
electrical parts creating an electric shock
hazard and damage the finish of the toaster.
STORAGE
Switch toaster off at the power outlet and
remove the power plug from the power outlet.
Allow the toaster to cool completely before
storing. Follow the directions for cleaning and
store in an upright position on a flat surface on
a bench top or in an accessible cupboard.
Do not store anything on top of the toaster.
WARNING
Do not use the toaster without the slide‑out
crumb tray in position. Do not allow crumbs to
build up in the crumb tray. Failure to clean the
crumb tray regularly may result in a fire hazard.
10