Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
pro.Bose.com
Hardware Installation
Rack Mounting the Chassis
The chassis requires one 1.75" (44 mm) rack space unit (1RU) in a standard 18" (457 mm) deep rack. To secure the chassis to the
rack, use four screws with washers (not provided) to prevent marring the front panel.
Tip: Use of neoprene rubber washers are a good choice because they grip the screw head and prevent the screws from backing
out from vibration or during transportation.
CAUTION: Only use the mounting hardware recommended by the rack manufacturer.
Spacing
When mounting adjacent to heat generating products such as power amplifiers, allow a 1RU open space between the SP-24 sound
processor and the amplifier to allow for air flow.
Connections
Audio Connections
The ControlSpace
SP-24 sound processor has two balanced
®
XLR analog inputs and four balanced XLR analog outputs
for connection with a variety of professional-level audio
equipment.
SP-24
Amplifier
English
Installation and Operating Guide
Power Connection
The ControlSpace SP-24 sound processor uses a universal
power supply for worldwide use. AC power connection is made
using the included power cord. Insert the proper power cord for
the voltage used in your region.
A digital device, pursuant to Part 15
gainst harmful interference when
rates, uses, and can radiate radio
on manual, may cause harmful
ntial area is likely to cause harmful
at his own expense.
SP-24
Installation and Operating Guide
Page 23
Publicidad
Tabla de contenido
