Gemini DRP-1 Manual De Instrucciones página 9

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

The full color LCD screen (10) displays the files, folders, recordings,
play mode, and record mode for the DRP-1 unit.
Recording Setup with the DRP-1
(Input / Output Connections)
The following is a list of the inputs and outputs contained on the unit
and a their appropriate connectors.
INPUT (Back)
Stereo RCA Line Input (4)
(Front)
1/4" (6.35mm) Stereo Line Inputs (6)
OUTPUT (Back)
Stereo RCA Line Outputs (8)
(Front)
1/4" (6.35mm) Phones/ Line Out (9)
XLR / 1/4" Combo Mic Input (3)
1/4" (6.35mm) Mic Input (5)
Balanced XLR Outputs (7)
Conexiones y Control de sistema • Connexions & Utilisation • Anschlüsse und Systemeinstellungen
Stereo RCA Line In (4) is where you input the signal coming from
a line source via a stereo RCA connection.
XLR Mic Input (3) is where you connect the signal coming from a
microphone source via a 1/4" (6.35mm) input.
1/4" (6.35mm) Stereo Line Input (6) is where you input the signal
coming from a stereo line source via a dual 1/4"
(6.35mm) connection.
1/4" (6.35mm) Mic Input (5) is where you input the signal coming
from a Mic source via a 1/4" (6.35mm) connection.
Stereo RCA Line Outputs (8) send a stereo RCA signal to an
output source.
Balanced XLR Outputs (7) send a balanced XLR signal to an
output source.
1/4" (6.35mm) Phones/ Line Out (9) sends the signal to
headphones or an output source through an 1/4" (6.35mm)
output and has a dedicated volume control.
*Note: MIC and LINE signals can only be read one at a time when
recording. If they are both connected to the unit at the same time, only
the MIC connection will be recorded.
MIC/LINE & FRONT/BACK Switches
On the front of the DRP-1 unit are two switches that are set to define
what type of signal is being input and where it is connected on the
unit. This ensures that every time a recording is made all other
connections do not have to be removed.
The FRONT-BACK switch is set according to where the
signal to be recorded is connected to the unit, namely the
back of the unit or the front. (FRONT-BACK Switch (22))
P R O A U D I O
Connections and System Control
8

Publicidad

Tabla de contenido
loading

Productos relacionados para Gemini DRP-1

Tabla de contenido