Cleaning And Maintenance - Bartscher 300104 Instrucciones De Servicio

Transport
•
Before transporting the thermo transport container,
close the ventilation cap.
•
Carefully place the thermo transport container in
an upright position in order to avoid spilling of
food products.
•
In case of using several thermol transport containers
you can stack them on each other during transport.
•
Ensure that the thermo transport container remains in
a stable, upright position during transport.
•
Secure the thermo transport container from shifting
and tilting.

Cleaning and maintenance

•
Clean the inside and outside of the thermo transport container after each use.
•
Remove the door seal from its bed located on the inner side of the door. Clean the seal
with warm water and a cleaning agent which can be used on a food contact surface,
then rinse with fresh water. Leave the seal to dry or wipe dry with a soft cloth.
•
Clean the inner side of the door with a soft, wet cloth soaked with warm water
with a mild cleaning agent, and then dry the surfaces thoroughly. Mount the
door seal on its bed located on the inner side of the door.
•
Never submerge the thermo transport container in water.
•
Wash the inside and outside of the thermo transport container with warm water and
a soft sponge or cloth. Next, rinse with clean water and dry the thermo transport
container using soft cloth.
•
Do not use abrasive or harsh cleaning agents that may scratch the device's surface.
•
After washing, leave the door open until the thermo transport container is
thoroughly dry.
•
Replace the door seal not less than every 2 years.
- 11 -