Instructions For Use; How To Use Mi-Rd1Cu16; Parameter Setting - Optimus MI Serie Manual De Instalación Y Funcionamiento

14. INSTRUCTIONS FOR USE

14.1 HOW TO USE MI-RD1CU16

PARAMETER SETTING

Push and hold "SET" button to enter the setting mode.
Push the ▲/▼ button to choose to set RX (receiver) or TX
(transmitter).
WHEN RX RECEIVER IS SELECTED:
Press "SET" to move through the menus and ▲ / ▼ to change the parameters. After any change
the unit will return to standby screen.
 FREQ: Frequency setting
1 MHz
Select frequency with ▲/▼
0.025 MHz Select frequency with ▲/▼
Allowed frequencies: 823~832 MHz, 863~865 MHz
(Default 823.150)
 GROUP / CHANNEL: Group / Channel setting
Select default group 1~8
G: Group
Select default channel, 1~15
CH: Channel
max.
(Default 1-1)
MI SERIES Version 1.2
MI Series
Select the number of frequency, first in
MHz and then in 0.025 MHz.
Select the group when "G" is flashing.
Select the channel when "CH" is flashing.
Wireless system
Page 13 of 27