Figure 7: Locking lever adjustment
Disconnecting the Vibrator Casing
(Quick-Disconnect)
1 Be sure the quick-disconnect locking lever on the motor
is in the up position
2 Rotate the core and casing counterclockwise from the
lock position to the unlock position
3 Pull the casing end straight out of the quick-disconnect
connector on the motor
4 Be sure that the locking lever is in the down position
when storing the motor to avoid damage to the lever
December 2018
Connecting the Vibrating Casing
(Threaded Connections)
N
OTEE:
Locking
Handle
1 Line up threads of the shaft with the threaded motor
connector Hold the casing end firmly and rotate the
casing until it engages into the motor
2 Hold the casing assembly in one hand while carefully
rotating the motor counterclockwise until motor is snug
to the shaft See
VBR-UM-00043-EN-06
The casing must be fitted with a thread
connector end
Figure 8: Threaded casing connector
Figure 9: Shaft insertion
Figure 10
Setup
Threads
Shaft
Page 9