Specifications - GMC AG115MGCL Manual De Instrucciones

Specification
Model:
Voltage:
Power:
No load speed:
Motor:
GB
Gear housing:
Disc diameter:
Disc bore size:
Spindle thread:
Weighted vibration:
Uncertainty:
Sound pressure:
Sound power:
Uncertainty:
Weight:
Power cord length:
Protection class:
As part of our ongoing product development, specifications of GMC
products may alter without notice.
The sound intensity level for the operator may exceed 85dB(A) and
sound protection measures are necessary.
AG115MGCL
230-240V~, 50Hz,
900W
12,000min
-1
Fan-cooled
Magnesium design
115mm
22.2mm
M14
10.547m/s
2
1.5m/s
2
91.3dB(A)
102.3dB(A)
3dB
2.2kg
3.0m
WARNING: Always wear ear protection where the sound level
exceeds 85dB(A) and limit the time of exposure if necessary. If sound
levels are uncomfortable, even with ear protection, stop using the
tool immediately and check the ear protection is correctly fitted and
provides the correct level of sound attenuation for the level of sound
produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense
of touch, numbness, tingling and reduced ability to grip. Long term
exposure can lead to a chronic condition. If necessary, limit the length
of time exposed to vibration and use anti-vibration gloves. Do not
operate the tool with hands below a normal comfortable temperature,
as vibration will have a greater effect. Use the figures provided in
the specification relating to vibration to calculate the duration and
frequency of operating the tool.
Sound and vibration levels in the specification are determined
according to EN60745 or similar international standards. The figures
represent normal use for the tool in normal working conditions.
A poorly maintained, incorrectly assembled, or misused tool, may
produce increased levels of noise and vibration. www.osha.europa.
eu provides information on sound and vibration levels in the workplace
that may be useful to domestic users who use tools for long periods
of time.
Carefully read and understand this manual and any label attached
to the tool before use. Keep these instructions with the product for
future reference. Ensure all persons who use this product are fully
acquainted with this manual.
Even when used as prescribed it is not possible to eliminate all
residual risk factors. Use with caution. If you are at all unsure of the
correct and safe manner in which to use this tool, do not attempt to
use it.
6