Hold; Placing A Call On Hold; Releasing A Call From; Flash - ATLINKS RCA 25202 Manual Del Usuario

Hold

Placing a Call on Hold

1. Press HOLD. The indicator for the line on hold flashes green.
2. Hang up or press another line button.
Releasing a Call from Hold
Press the line button for the call on hold. The phone automatically goes into
speakerphone mode.
NOTE: If you want to change modes, lift the handset to switch to the handset, or press the HEADSET
button to use the headset.

Flash

Use the FLASH button to activate custom calling services such as Call Waiting, which is
available through your local telephone company.

Redial

To quickly redial the last number you dialed (up to 32 digits):
1. Pick up the handset, or press SPEAKER or HEADSET.
2. The line is selected automatically.
3. Wait for a dial tone.
4. Press REDIAL.

Volume

The ringer, speaker, and handset/headset volumes can be set independently. Your
telephone is preset but may be set to individual taste. To return to the default settings,
press both the VOLUME or buttons simultaneously.
Telephone Operation
19