Tools And Parts Required - Daintree GE current LIS Serie Guia De Instalacion

Lumination LIS Series
®
PSU Replacement Procedure

Tools and Parts Required:

• New power supply unit (PSU)
• Wirecutter
• T15 Torx or Phillips #2screwdriver
• UL approvedwire connectors (4-pin)
1
Disconnect the luminaire power source.
Mounting bracket not shown for clarity
Mounting bracket not shown for clarity
2
Loosen 3 screws and remove the PSU cover.
Do not cut green AC wires
Do not cut green AC wires
4
Cut the original DC, AC(do not cut the green wire) and
Dimming connections.
Install new PSU
Other wires hidden for clarity
Other wires hidden for clarity
6
Install the new PSU using a star washer under each
screw.
Install new PSU
AC
AC
3
Locate the DC (red and blue), AC (green, white and
black) and Dimming connections (purple and gray).
Other wires hiddenfor clarity
Other wires hiddenfor clarity
5
Unscrew the old PSU and remove.
AC
AC
7
Reconnect the DC, AC, and Dimming wires using UL
approved connectors. Re-attach the PSU cover.
11
Installation Guide
Dimming
Dimming
DC
DC
Remove oldPSU
Remove oldPSU
Dimming
Dimming
DC
DC