Technical Specifications; Maintenance And Cleaning - THOMSON DS100i Manual De Instrucciones

TECHNICAL SPECIFICATIONS

• Remote control power source: 2 LR03/AAA 1,5V (batteries included)
• Power Requirements: Input: 100V~240V 50Hz/60Hz
• Power Consumption: 60W Max
• Audio Input Sensitivity: 120dB (AV IN), 114dB (LINE IN)
• Frequency ranges: FM: 87.5 to 108MHz
Accessories: I/B, remote control (batteries included), 1.2m RCA to RCA video cord, 5pcs docking brackets.
Note: Unit design and specifications are subject to change without notice. The manufacturer reserves the right to make the
necessary improvements.

MAINTENANCE AND CLEANING

Symptom
Radio sound distorted
No radio sound.
The iPod will not play
No iPod sound
mAINTENANCE AND ClEANING
• Unplug the appliance before cleaning it.
• Remove fingerprints and dust with a soft and slightly damp cloth. Do not use abrasive products or solvents that may
damage the appliance's surface.
ATTENTIoN: Never immerse the appliance in water or in any liquid whatsoever.
• If it is not used for a long time, unplug the appliance and remove the batteries.
Monday to Thursday (from 9 am to 18 pm) and Friday (9 am to 3:30 p.m.)
EN 16
Possible Cause
• The station is not tuned in.
• There is a poor signal in the area.
• The unit is not in tuner mode.
• The volume has been muted or is on the
minimum setting
• The unit is not in iPod mode.
• The iPod is not connected correctly.
• The unit is not in iPod mode.
• The volume has been muted or is on the
minimum setting.
is a trademark of TECHNICOLOR S.A. used under license by:
Parsons International France - 19 Boulevard Albert Einstein
77420 Champs sur Marne - France
N°Azur (+33 ) 0825 745 770
TOWER WITH DOCKING for iPod and iPhone
DS100i
• Fine tune the station.
• Reposition the unit.
• Press SouRCE button repeatedly until
switching to tuner.
• Adjust the volume level or press muTE
button to resume audio.
• Press SouRCE button repeatedly until
switching to iPod.
• Reconnect the iPod.
• Press SouRCE button repeatedly until
switching to iPod.
• Adjust the volume level or press muTE
button to resume audio.
call rate according to operator
Solution