Connect Power; Sleep Function - THOMSON DS100i Manual De Instrucciones

TOWER WITH DOCKING for iPod and iPhone

CoNNECT PoWER

Caution:
• Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
or the underside of the unit.
• Before connecting the AC power cord, ensure you have
completed all other connections.
Connect the AC power cord to the wall socket.
Power
You can use all the functions on the top of the unit or the
remote control after connecting to power supply (called
Standby Mode).
Turn on
Press q button on top panel or on remote control to turn the
system on from standby mode.
Note:
When turning the system on, the system will continue in the
mode it was in when it was turned off last time and didn't
unplug power cord.
Turn off
Press q button on top panel or press q/PoWER button
on remote control to turn the system off and go to standby
mode.
Note:
Be sure to unplug the power cord from the outlet when the
system is not in use for an extended period of time.

SlEEP FuNCTIoN

At the standby mode:
• Press SlEEP repeatedly at any time to choose the
duration: 90, 80, 70, 60, 50, 40, 30, 20, 10 minutes or
oFF. The device turns on "WElComE" appears on
the LCD.
• The device turns itself off automatically after the
selected time delay.
During playback
• Press SlEEP repeatedly at any time to choose the
duration: 90, 80, 70, 60, 50, 40, 30, 20, 10 minutes or
oFF.
• The device turns itself off automatically after the
selected time delay.
DS100i
Set time
The time is displayed on the LCD.
• In standby mode, press and hold 12 of the device or
12/TImE SET/mEm on the remote for a few seconds:
"ClK" appears and the hour display flashes.
• Set the time using TuNING w/s or TuN +/- (5/6).
• Press 12 or 12/TImE SET/mEm to confirm, the minute
display flashes.
• Set the minutes using TUNING w/s or TuN +/-(5/6).
• Press 12 or 12/TImE SET/mEm to confirm.
• Once the iPhone connected, it is necessary to press and
hold CloCK SYNC to synchronize the clock.
• During playback, press CloCK vIEW to see the present,
then press CloCK vIEW again to resume the previous
display.
Note: Only the clock setting is in standby mode.
PlAY FRom IPHoNE/IPoD
Compatible iPhone/iPod
Apple iPod models with a 30-pin dock connector:
• iPod touch (4
• iPod nano (6
•iPhone 3GS and iPhone 4
listen to the iPhone/iPod
• Dock the iPod/iPhone on to the unit. Power on
the unit, then press SouRCE button repeatedly to
switch to iPod mode, and then the playback will start
automatically.
• Press 12 button to start or pause the playback.
• Press TuNING w/s on the device or TuN+/- (5/6) on
the remote to switch from one track to another.
• Press mENu button on the remote to return back to the
iPod menu, press navigate w/s buttons to select your
desired track for playback.
• Press PlAYlIST w/s button to cycle through the
playlists on the connected iPod/iPhone.
• Press AlBum w/s button to select your desired album
for playback on the connected iPod/iPhone.
• Press CHAPTER+/- button to select a corresponding
chapter for playback.
• Press and hold CloCK vIEW/SHuFFlE button to
enable or disable the shuffle function.
• Press REPEAT/ST button repeatedly to cycle through
the repeat options (repeat 1, repeat album and repeat
off).
Note:
• Press the REPEAT/ST button once, the "REPEAT" icon
flashes on left top of the LCD to indicate "REPEAT 1».
• Press the button twice, the «REPEAT" icon shows
steadily to indicate "REPEAT AlBum».
• Press the button thrice, the «REPEAT" icon disappears
to indicate "REPEAT oFF».
generation)
th
generation)
th
USING
13 EN