Mode-Jumping Shortcuts; Other Shortcuts; Editing On The Miniak - Akai Professional Miniak Guia De Inicio Rapido

MODE-JUMPING SHORTCUTS

Access each of these shortcuts by holding one of the [PROGRAMS], [RHYTHMS], [SEQUENCES] or
[MULTI] buttons and then pressing one of the other buttons.
[PROGRAMS]
Press [MULTI]:
Press [SEQUENCES]: set the Sequence's Program.
Press [RHYTHMS]:
[MULTI]
Press [PROGRAMS]: jump to the most recent part's Program.
Press [SEQUENCES]: jump to the Sequence of the most recent part (if any).
Press [RHYTHMS]:
[SEQUENCES]
Press [PROGRAMS]: jump to the Sequence's Program.
Press [MULTI]:
Press [RHYTHMS]:
[RHYTHMS]
Press [PROGRAMS]: jump to the Program of the most recent drum.
Press [MULTI]:
Press [SEQUENCES]: (no shortcut).

OTHER SHORTCUTS

In most areas, pressing the control knob twice (double-click) restores the default value.
Button-specific shortcuts:
[OCTAVE]: Press both [OCTAVE] buttons simultaneously to return to the default octave range of C3 through
C6.
[TAP TEMPO]: Hold [TAP TEMPO] and turn the control knob for fine control over the tempo.
[PROGRAMS]: When editing a parameter, hold down the control knob and wiggle an (X/Y/Z) knob to assign
the knob to that parameter.
[MULTI]: For each part, hold down [MULTI] and move a slider or the pitch wheel to jump to the controller
assignment options for that part. Do the same with the (X/Y/Z) knobs.

EDITING ON THE MINIAK

Right out of the box, the Miniak offers all the great sounds and operation that most users will ever want. But,
if you're a "power user," you'll find a wealth of easy-to-access editing capabilities.
To dig deep into the Miniak's capabilities, push the DATA DIAL to edit the parameters associated with the
current operating mode (Programs, Multi, Sequences, Rhythms, or Config). The current mode's light will
glow red once you begin editing.
Turn the DATA DIAL to cycle through various parameters. Push
and turn the DATA DIAL to edit; push once more to accept your
changes.
Push the DATA DIAL twice in quick succession to reset a parameter to its default (factory) value.
For much more detail on editing, see the Reference Manual.
set the most recent part's Program.
set the most recent drum's Program (for drum Programs only).
jump to the Rhythm of the most recent beat (if any).
set the most recent part's Sequence.
(no shortcut).
set the most recent beat's Rhythm.
4
The [STORE] button lights when
you have made edits. Press it to
save your changes.