Publicidad
Idiomas disponibles
Idiomas disponibles
Loosen the two screws in the right and left angle brackets 3 to 4 turns.
Insert the screws through the 2 holes at the base of each side panel and slide the bracket down until
it stops. Attach each bracket to the bottom panel with one 3/16-24 x 3/8 in. screw. Retighten the 4
loosened screws.
3/16-24 x 3/8 in. Screw
Qty.2
Attach the beam to side panels with four 3/16-24 x 3/8 in. screws as shown.
Beam
Left Panel
Rear Panel
3/16-24x 3/8 in. Screw
Qty.4
Right Panel
18
Publicidad
