Description; Specifications - CH CHN70800 Manual Del Usuario

Operating Instructions and Parts Manual
Framing Nailer

Description

This nailer is designed for framing, trusses, sub-floors, sheathing, exterior decks, and
pallet/create assembly. Features include: convenient rear loading magazine which
holds up to 100 nails, tethered no-mar decking tip, quick clear nose, an adjustable
depth of drive mechanism, oil free, electronic low nail indicator, nail placement laser
pointer, in-line magazine, bubble level, anti-dry fire, conversion trigger with safety
lockout, rubber comfort grip, swivel plug, and adjustable exhaust.
Figure 1 - CHN70800 Framing Nailer

Specifications

Model CHN70800
Requires: 2.5 Avg SCFM
using 16 fasteners per
minute at 90 psi
Air Inlet: 1/4 inch NPT
Fastener Size Range:
2 inches to 3-1/2 inches
u
long
0.113 inch to 0.131 inch
u
shank diameter
31° to 34°
u
Magazine Capacity:
70 to 105 fasteners per load
Weight: 9 lbs. 4 oz.
Length: 21 inches
Height: 14-1/2 inches
Maximum Pressure:
120 psi
Pressure Range:
70 psi to 120 psi
Batteries: Two (2) AAA
Laser: Class IIIA
Wavelength:
640 nm - 660 nm
Radiant Power:
1.53 < 5 mW
Locate model number and date code on
magazine and / or tool body. Record below:
Model #: _____________________________
Date Code: ___________________________
Retain these numbers for future reference.
www.chpower.com