Axis Ip Utility; Axis Camera Management - Axis 214 PTZ Guia De Instalacion

Page 6

AXIS IP Utility

AXIS IP Utility is a free Windows
application that discovers and displays Axis
devices on your network.
The application can also be used to
manually set a static IP address.
Note that you must install the camera on
the same network segment (physical
subnet) as the computer running AXIS IP Utility.
AXIS IP Utility is available on the CD supplied with this product, or it can be downloaded from
www.axis.com
Automatic discovery
1. Check that the camera is connected to the network and that power has been applied.
2. Start AXIS IP Utility. When the camera appears in the window, double-click it to open the
home page.
3. See page 8 for instructions on how to set the password.
Set the IP address manually
1. Acquire an unused IP address on the same network segment your computer is connected
to. Locate the serial number (S/N) on the camera's underside label.
2. Click the button
IP address for the camera.
3. Click the Set IP button and then restart the camera (within 2 minutes).
4. Click View Home Page to access the camera's web pages.
5. See page 8 for instructions on how to set the password.
Note:
AXIS IP Utility can be used to change a dynamically set IP address to a static one.

AXIS Camera Management

AXIS Camera Management is a powerful and efficient installation and management tool
specially designed for use with Axis video products. Using standard network protocols and
methods, the tool can automatically find and set IP addresses, show connection status and
manage firmware upgrades of multiple Axis video products. AXIS Camera Management is free
of charge and is available on the CD included with this product, or from www.axis.com
(Set IP address using serial number) and enter the serial number and
AXIS 214 Installation Guide