Axis Ip Utility - Single Camera/ Small Installation - Axis P3343-VE Guia De Instalacion

AXIS P3343-VE/P3344-VE Installation Guide

AXIS IP Utility - single camera/ small installation

AXIS IP Utility automatically discovers and displays Axis devices on your network. You can also
manually set a static IP address through this application. AXIS IP Utility is available on the Axis
Network Video Product CD, or it can be downloaded from www.axis.com/techsup
Note that you must install the AXIS P3343-VE/P3344-VE Network Camera on the same network
segment (physical subnet) as the computer running AXIS IP Utility.
Automatic discovery
1. Check that the AXIS P3343-VE/P3344-VE Network Camera is connected to the network and
that power has been applied.
2. Start AXIS IP Utility.
3. When AXIS P3343-VE/P3344-VE appears in the window, double-click to open the camera's
home page.
4. See page 11 for instructions on how to set the password.
Set the IP address manually (optional)
1. Acquire an unused IP address on the same network segment your computer is connected to.
2. Select the AXIS P3343-VE/P3344-VE in the list.
3. Click the button
4. Click the Assign button and follow on-screen instructions. Note that the camera must be
restarted within two minutes for the new IP address to be set.
5. Click the Home Page button to access the camera's web pages.
6. See page 11 for instructions on how to set the password.
Assign new IP address to selected device and enter the IP address.
Page 9