Manual Mode - Merrychef 402s Instrucciones De Instalación Y Operación

USING THE OVEN FOR THE FIRST TIME 2
SETTING THE OVEN PROFILE
The oven profile sets the following factors: operating temperature scale ( Centigrade or Fahrenheit ),
Oven Mode, Program protection, Bleep sound & Lower Temperature Band.
Switch oven OFF
1
2
Switch the oven ON and press and hold the Lower
Right ( Edit Oven profile is hidden in the display )
function key to display OVEN PROFILE.
( Note: this screen is available for 5 seconds )
Note: The displayed logo may be different
if programs have been entered from a MenuKey
The display shows the current OVEN PROFILE setting, press the corresponding pad to cycle through
the options available then press Save to store the diplayed settings and exit this screen.
1 TEMP SCALE
The display shows the current Oven temperature
°C
scale, Centigrade
2 PROGRAM MODE
OFF Programs are protected and cannot be edited.
ON Allows Programs to be edited and added,
MenuKey can be created
3

MANUAL MODE

OFF Manual controls are disabled. Only pre-set
Programs can be used
ON Manual controls operate the oven directly
from the control panel
4
SOUNDER VOLUME
The length of the audible warning 'bleep' volume
can be adjusted from 1 to 5 (maximum).
5 LOWER BAND Temperature
The range of temperature lower than the
PREHEAT temperature inside which the oven
programs will still operate 30- 150°F (15-75°C)
Press Save to save the settings and exit
OVEN PROFILE
Tempscale: °F
Program Mode: OFF
Manual Mode: OFF
Sounder Vol: 1
°F
or Fahrenheit .
Edit Oven Profile
Lower Band 100 :
°F
>>
Save
Please note:
The Oven MODE default settings
are PROGRAM MODE OFF and
MANUAL MODE OFF.
PROGRAM MODE ON allows oven
settings to be altered and should only
be used to establish or edit programs
or to save programs to a MenuKey.
13