Repairs; Environmental Protection; Technical Specifications - Metabo ASR 35 L AutoClean Manual Original

39 Floor nozzle set (with floor piece and wet
vacuuming piece)
40 Multi-purpose nozzle
41 Power tools suction set
42 Suction hose
43 Suction hose (antistatic)
44 Adapter
45 Suction hose
with connecting piece inner dia. 30 mm
and connecting piece outer dia. 35 mm

13 Repairs

Repairs to appliances must be carried out by qual-
ified electricians only!
Use only original Metabo spare parts.
Contact your local Metabo representative if you
have Metabo power tools requiring repairs. For
addresses see www.metabo.com.
You can download a list of spare parts from
www.metabo.com.

14 Environmental Protection

Metabo's packaging can be 100% recycled.
Worn-out devices and accessories contain large
amounts of valuable raw materials and plastics,
which can also be recycled.
These instructions are printed on chlorine-free
bleached paper.
For EU countries only: Never dispose of
appliances in your household waste! In
accordance with European Guideline 2002/
96/EC on used electronic and electric equipment
and its implementation in national legal systems,
used power tools must be collected separately
and returned for environmentally compatible recy-
cling.

15 Technical Specifications

Explanatory notes on the specifications on page 2.
Changes due to technological progress reserved.
K = Dust class As per EN 60335-2-69.
A = Outer dimensions
U = Mains voltage
F = Mains frequency
A = Current consumption
N = Mains connection lead
P = Nominal power input
1
p = Max. vacuum (at hose)
U1
p = Max. vacuum (at blower)
U2
V = Max. volume flow (at hose)
l/s1
V = Max. volume flow (at blower)
l/s2
D = Max. throughput (at hose)
max1
D = Max. throughput (at blower)
max2
V = Max. container volume
m = Weight (without mains cable)
A-effective perceived sound levels:
L = Sound pressure level
pA
L = Acoustic power level
WA
During operation the noise level can exceed
80 dB(A).
Wear ear protectors!
Measured values determined in conformity with
EN 60704.
~
Alternating current
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
ENGLISH
ENG
21