Getting Started Quickly - AKG IVM 4 Modo De Empleo

1
2
4
1. Make all audio connections.
2. Connect the antenna to the transmitter.
3. Connect the transmitter to power.
4. Insert the supplied batteries into the SPR 4 receiver.
5. Switch power to the receiver on and select the code for the country where you
are going to operate your IVM 4 (section 3.4.4).
6. Select a clean frequency on the receiver ("AUTO" menu, section 3.4.5).
7. Connect the earbuds to the receiver.
8. Switch power to the transmitter on (section 3.5.4) and select the code for the
country where you are going to operate your IVM 4 (section 3.5.6).
9. Tune the transmitter to the same frequency you selected on the receiver (sec-
tion 3.5.7).
10. Set RF output on the transmitter (section 3.5.9).
11. Set input gain on the transmitter (section 3.5.11).
12. Set the desired volume for the earbuds.
IVM 4

Getting Started Quickly

3
7
12
23