Half-width Shelf/Frame
To Remove
and
Replace
a Shelf/Frame:
1.
Remove the shelf/frame
by tilting
it up at the front and lifting it
out of the shelf supports.
2.
Replace the shelf/frame
by guiding
the rear shelf hooks into the
shelf supports.
Tilt the front of the shelf up until rear shelf hooks
drop into the shelf supports.
Check to make sure that the shelf is
securely
in position.
Full-width Shelf
To Remove
and
Replace
the Shelf:
1.
Remove
all items from the shelf. Remove
the shelf by raising the
front and pulling it forward.
2.
Replace the shelf by lifting the front while sliding the shelf back
until it locks into place.
Full-width Wire Basket
To Remove
and
Replace
the Basket:
1.
Remove
all items from basket.
Remove the basket
by lifting the
front out of the ball-bearing
slides, then lifting the basket
out.
2.
Replace the wire basket by first extending
the ball-bearing
slides,
then lowering
the tabs on the sides of the wire basket into the
slides. Push the basket
backward
until it is under the shelf.
Frozen Food Storage Guide
Storage
times will vary according
to the quality and type of food, the
type of packaging
or wrap used (should be airtight and moisture-
proof), and the storage
temperature.
Seal the package
or container
securely
to prevent taste and odor transfer throughout
the product.
Ice crystals inside a sealed package
are normal.
Put no more unfrozen
food into the freezer than will freeze within
24 hours (no more than 2 to 3 Ibs of food per cubic foot [907-1,350
g
per 28 L] of freezer space). Leave enough space in the freezer for air
to circulate
around packages.
The freezer door must close tightly. For
more information
on preparing
food for freezing, check a freezer
guide or reliable cookbook.
DOOR FEATURES
Half-width Wire Basket
To Remove and Replace the Basket:
1.
Remove
all items from basket.
Remove the basket
by lifting the
front out of the slides, then lifting the basket
out.
2.
Replace the wire basket
by lowering
the basket
into the slides
then pushing
the basket
backward
until it is under the shelf.
oo
The door rails may be removed
for easier cleaning.
To Remove
and Replace
the Rails:
1.
Remove
the rails by pulling straight
up on each end of the rail.
2.
Replace the rails by sliding the shelf rail into the slots on the door
and pushing
the rail straight
down until it stops.
To Remove
and Replace the Bins:
1. Remove the bin by lifting it and pulling it straight out.
2. Replace the bin by sliding it in above the desired support and
pushing it down until it stops.
11