Eco-Flo SPP Serie Manual Del Usuario página 5

INSTALLATION
Inlet Pipe
For parts or assistance, call ECO-FLO Customer Service at 1-877 326-3561
Discharge piping can be
PVC, polypipe or
galvanized steel
Check
Valve
5
CAUTION:
Check local codes before installing
pump.
STEP 1:
Pump must be installed in a suiable
properly vented basin which is at least
24" deep and is at least 18" wide
for pumps fitted with wide angle on/
off switches and at least 14" wide
for pumps fitted with vertical on/off
switches.
STEP 2:
Pump must be placed on a hard sur-
face in a sump that has been cleared
of all debris. Never place the pump on
clay, earth or gravel surfaces.
STEP 3:
Connect the discharge pipe, fittings
and check valve to the discharge port
of the pump. It is recommended that
the discharge pipe diameter be equal
to or larger than the discharge size of
the pump.