Philips NORELCO 7000 Serie Instrucciones Importantes De Seguridad página 31

C
C
C
1
2
C
3 Remove the shaving heads from the
shaving head holder and discard.
DO NOT discard the retaining ring.
4 Place new shaving head in the holder.
Make sure the notches on both sides of the
shaving heads fit exactly onto the projections in
the shaving head holder.
5 Hold the shaving head holder in your hand
and place the retaining ring on the shaving
head holder (1). Turn clockwise (2) to
reattach the retaining ring.
Do not place the shaving head holder on a
surface, as damage may occur.
NOTE: Each retaining ring has two recesses that
fit exactly into the projections of the shaving
head holder. Turn the ring clockwise until you
hear a click to indicate the ring is fixed into
place.
6 Repeat this process for the other two
cutters and combs.
7 Reattach the shaving head holder to the
bottom part of the shaving unit.
ENGLISH
31