Maintenance - Seca 465 Manual De Instrucciones Y Garantía

8. MAINTENANCE

1. Switch off the printer.
2. Open the flap covering the paper cutter adjusting
wheel.
Protective film
ATTENTION!
Damage to device from missing protective film
The paper cutter adjusting wheel and the
mechanism beneath it are protected by a film.
− Do not remove the protective film.
− Simply lift the protective film to operate the
adjusting wheel.
3. Turn the paper cutter adjusting wheel in the
direction of the arrow until the paper cutter has
returned to its initial position.
4. Open the paper compartment cover.
5. Eliminate the cause of the fault.
6. Close the paper compartment cover until you hear
it engage.
7. Switch on the printer.
We recommend having maintenance carried out by a
local service partner. The seca customer service
department would be pleased to help here.
English
Paper cutter
adjusting wheel
Cover flap
Maintenance • 73