Cleaning And Maintenance - Olimpia splendid MIA 2-9 Instrucciones Para La Instalación, Uso Y Mantenimiento

GB

7.0 Cleaning and maintenance

Before effecting any maintenance operation or cleaning on the stove, take the following
precautions:
• Be sure that all parts of the stove are cold.
• Be sure that the ashes are completely cold.
• Be sure that the general switch is in the "OFF" position.
• Be sure that the plug is pulled out of the socket to avoid accidental contact.
• Once the maintenance phase is completed check that everything is in order as per
before the intervention (the brazier is placed correctly).
Follow carefully the following cleaning instructions. Failure to follow
these instructions could create problems with the operation of the
stove.
7.1 How to clean the combustion chamber for models ES/ESP 11-
13 (once a month)
- open the door and remove the brazier and the ash tray (fig. 1)
- unscrew the 2 screws in the central bulkhead (fig. 2)
- pull the central bulkhead towards outside and, at the same time, support and take off
the fire heater placed on the upper part (fig. 3-4)
- unscrew the 2 screws and remove the flap (fig. 5-6)
- remove the inside right and left bulkheads pulling outward (fig. 7-8)
- remove the bottom part pulling up and laterally (fig. 9-10)
- scrape the inner pipes with a wire brush (fig. 11-12)
- use a vacuum cleaner to remove the ash from the combustion chamber (fig. 13), be-
hind the exchanger pipes (fig. 14) and inside the brazier (fig. 15)
- do the reverse process to re-assemble.
Fig. 1
Fig. 3
Fig. 5
Fig. 7
Fig. 9
20
Fig. 2
Fig. 4
Fig. 6
Fig. 8
Fig. 10