Pre-Operation
sharp objects. Bursting hoses may
cause injury. Examine hoses regularly
and replace if damaged. Do not
attempt to mend a damaged hose.
UNPACKING
Remove the equipment and all parts
from the carton. The carton should
contain the following.
•
One pressure washer (pump,
engine, cart base)
•
One cart handle assembly
•
One spray gun and quick connect
lance
•
Five spray tips
•
One high pressure hose
•
One pack of nuts, bolts, and
manuals
•
One bottle of engine oil
If any parts are missing, DO NOT
RETURN THE UNIT TO THE RETAILER.
Know the unit's model number
(located on the serial number tag on
the pressure washer frame) and call 1-
888-MAXUS4U for replacement parts.
After unpacking the product, inspect it
carefully for any damage that may
have occurred during transit. Make
sure to tighten fittings and bolts
before using the pressure washer.
the unit if it's damaged during
shipping, handling, or use. Damage
could result in bursting and cause
injury or property damage.
ASSEMBLY
Use 1/2 in. wrench to assemble the
pressure washer.
1. Slide the handle assembly over the
lower legs of the cart base. Use the
(supplied) standard nuts and bolts
to secure the handle to the legs
(See Figure 1).
Figure 1 – Assemble Handle
2. Slide clear plastic detergent hose
onto brass hose barb (See Figure 2).
Keep hose
away from
Figure 2 – Attach suction tube to barb
fitting
3. Insert quick connect spray tips into
rubber holders on front of the placard.
(See Figure 3).
Figure 3 - Insert spray tips into the
holder
Do not
operate
4. Secure garden hose (not included) to
the inlet connection on pump (See
Figure 4).
Detergent hose/
Chemical tube
Hose barb
High
pressure
hose
Garden hose
Figure 4 - Pump hook up
MX5223, MX5333, and MX5433
Pump
outlet
Pump inlet
5
5. Connect the high pressure hose to the
pump outlet (See Figures 4 and 5).
Figure 5 - Connect High pressure hose
to pump
6. Attach the lance to the gun
(See Figure 6).
Figure 6– Attach lance to gun
Pressure adjustment knob
Thermal
relief valve
www.maxustools.com