Assembly And Pre-Operation - Maxus MX5223 Manual Del Usuario

Operating Instructions and Parts Manual

Assembly and Pre-Operation

ASSEMBLY AND PRE-OPERATION
1. Slide the handle assembly over the
lower legs of the cart base. Use the
(supplied) star knob and bolts to
secure the handle to the legs (See
Figure 9).
2. Slide clear plastic detergent hose onto
brass hose barb (See Figure 10).
3. Insert quick connect spray tips into
rubber holders on front of the placard.
(See Figure 11).
4. Secure garden hose (not included) to
the inlet connection on pump (See
Figure 12).
5. Connect the high pressure hose to the
pump outlet (See Figure 13).
6. Attach the lance to the gun (See Figure
14).
7. Install quick connect tip (See Figure
15).
10
www.maxustools.com
Figure 9 - Assemble handle
Figure 11 - Insert spray tips into the holder
Detergent
Hose /
Chemical
Tube
Hose Barb
High
Pressure
Hose Outlet
Figure 12 - Pump hook up (MX5433 shown - other models are similar)
Figure 14 - Attach lance to gun
Star
Knob
Figure 10 - Attach suction tube to barb
fitting
Figure 13 - Connect high pressure hose to
pump
Detergent
Garden
Hose Inlet
Thermal Relief Valve
Figure 15 - Quick connect tip
Unloader /
Pressure
Control
Knob