Dimmer Control - Denver Electronics CR-718 Instrucciones De Uso

DIMMER CONTROL

The dimmer button (1) allows you to set the brightness of the LED
display to high, medium and low 3 levels.
DISPLAY LIGHT AUTO ON/OFF FUNCTION
1. Press display light auto on-off button (10) for 3 seconds, the LED
display indicator will light on, the LED display will turn off after 15
seconds automatically.
Press any button to maintain the LED display for 15 seconds.
2. Press display light auto on-off (10) button for 3 seconds, the LED
display indicator will light off to cancel this function.
NAP timer function (count down timer)
During radio off mode, press MEM.SET / M+ / NAP button (12) to turn
on NAP mode, the NAP time will keep by 5 seconds, within 5 seconds
and press MEM.SET / M+ / NAP button (12) button can change the
duration from 90 min – 10 min.
The alarm buzzer will sound for 30 min and then shut off automatically.
To stop the alarm buzzer, press the ON/OFF button (13).
Press the MEM.SET / M+ / NAP button (12) has no effect during alarm
operation. Press ON/OFF button (13) to cancel NAP function.
DAYLIGHT SAVING TIME (DST) MODE
For countries with daylight saving time (DST) (one hour of difference
between summer time and winter time), this clock radio offers you DST
option to adjust summer time.
In standby mode press and hold for 2 seconds the >>/TUNE+/DST
button (9).
The clock advances by one hour. To exit DST mode, repeat the above
operation.
AUTO TOGGLING BETWEEN DISPLAY CONTENTS
In clock mode, press and hold DISPLAY button (11) for 3 seconds.
"ON" appears on the display. Then the display automatically shows
below contents in 5-10 second intervals.
Current time > Month, Day > Temperature > Humidity
To deactivate this function, press and hold DISPLAY button (11) for 3
seconds. "OFF" appears on the display, then the display switches back