Ovislink Air Live WL-5470AP Manual Del Usuario página 6

Wireless Mode Setup
This page include all primary and major parameters for the wireless mode
setting. Any parameter change will cause the device to reboot for the new
setting to take effect.
Wireless Modes:
The default mode is set to AP. You can change it to another mode.
Network Type: When in Client mode, you can select between Ad-Hoc or
Infrastructure.
Client / Bridge Mode Setup
Client Mode
Device B:
WISP Outdoor AP
Network Type: Infrastructure
Please make sure both A and B are set to the same ESSID and channel.
Wireless Access Point
WL-5470AP
AP, Client, Bridge, WDS Repeater, Universal
Repeater, WISP(Client Router), WISP + Universal
Repeater and Gateway (Broadband Router) mode
Device A:
Mode: Client mode
English
5
5