auna multimedia Connect 120 Manual Del Usuario página 25

radio portal when in any network-connected mode.
Time zone, daylight
Set your time zone. If your country uses daylight saving and it is in effect, turn on the Daylight savings option.
Manual update
If you set „No update", the wizard prompts you to set the time and date manually. The date and time are displayed as
dd-mm-yyyy and hh:mm.
The active value appears flashing. Adjust each value with the navigation wheel or on the remote control. Once the
value is set, press to continue setting the next value.
Network
WLan region
Select the WLan region to obtain the optimal WLan connectivity: Canada, Spain, France, Japan, Singapore, Aust-
ralia, and Republic of Korea.
Scanning for the network
The unit is compatible with all common network protocols and encryption methods. It searches for available net-
works and list them out for you choose.
There will be hints for the type of network – if your network device supports WPS function, it will display [WPS]
before the SSID (the name of network device). Select the one you want to connect to.
For the wireless connection, you will be prompted to type in the pass phrase.
Standard encrypted network
To enter the network's key, use the navigate wheel or the direction keys on the remote control to move the cursor
through the characters and press OK to confirm.
There are three options accessible by tuning the navigation wheel back before the first characters – Backspace,
OK and Cancel.
WPS encrypted network
WPS encrypted networks are identified by WPS at the start of the network name when the unit searches the
available AP. Useone of the following methods of connection:
•
Push button
The unit prompts you to press the connect button on the router. It then scans for a ready Push Button Connect
network and connects.
25