Other Features - auna multimedia Connect 120 Manual Del Usuario

When you select the BT mode, the device is entering to pairing and the BT icon at the bottom of the screen will flash.
Turn on your smartphone, tablet or other BT devices to search for the device. The pairing name is "Connect 120". When
pairing is successful, the BT indicator will light up and stop flashing. To release the connection, press and hold PRESET/
BT on the device or on the remote control.
Headphone jack: The unit featured with headphone jack for you to continue enjoying the music in vary environments,
such as noisy background, or the area that requires every one keeping silent.
It is recommended to reduce the volume before put on the headphones. After the headphones are positioned properly,
increase the volume to the desired level.
Line out jack: connect an audio cable from the unit to your own HiFi speaker system to enhance sound performance.
Error
The device does not switch on.
No sound
No network connection
can be established.
WiFi connection cannot
be established
Wired connection cannot
be established.
No station is found
Hiss in FM mode
No stations available /burbling /
intermittent in DAB mode.
BT

Other Features

Troubleshooting
Remedy
Check it the power adaptor is connected properly
- Turn on the sound as it may be muted
- Increase the volume
- Pull any connected headphone or speaker from the connector jack.
- Try to set an IP address at the device
- Activate the DHCP function on the router and make the connection
again at the device
- A firewall is activated on the network — set the respective program
in such a way that access is possible
- Reboot the router
- Check the availability of WLAN network on the router.
- Place the device closer to the router
- Make sure the password is correct..
- Check the availability of LAN network on the access point.
- Check the network as well as the access point and firewall.
- The station may not be available currently, try it again later or select
another station.
- The link of the station is changed or the station no longer transmits,
ask the provider for information.
- The link of manual added station is not correct, make sure it is correct
and re-enter
- Check/move the FM antenna
- Move the radio
- Move the radio.
- Rescan local stations only (high-strength).
- Check the local DAB coverage.
35