Radio Operation - Clarion FX508 Manual Del Usuario

04.- AUDIO SETTINGS (Cont.)
4 .3 SELECTING SYSTEM SETTING
Press the System icon in the bottom of the main screen to access the system
setting menus and the left and right arrows to move between the various menus.
Language Selection
Use the left and right arrows to select the system language from English (ENG),
Spanish (ESP) and French (FRE).
Beep Sound
Toggles whether a beep tone is heard when a button is pushed.
Text Scroll
Toggles whether the unit will scroll to show complete song/track information when
it is too long to fit on the main screen.
Ignition Option
When checked this option keeps the unit ON for 10 minutes after the ACC is
turned from ON to OFF.
Quick Charge
When checked this option will allow you to charge your mobile devices (max 1.5
Amp). You will not be able to playback from the device while charging.
Initial Volume
Use the left and right arrows to set the volume level at which the radio will start at
whenever the unit is powered on. Values can range from 0 to 40.
Aux Volume Adjustment
Use the left and right arrows to increase or decrease the volume level of attached
external devices. Values can range from 0 to +3.
Navigation Volume Adjustment
Use the left and right arrows to increase or decrease the volume level from
external announcement devices. Values can range from -10 to +10.
Speed Volume Adjustment
Use the left and right arrows to choose the volume mode to be used based on the
speed of the vehicle (requires connection to vehicles speed sensor). Values –
OFF, Low, Mid, High.
Edit Home Menu
This allows you to change the order of the widgets on the Home Menu.
6
04.- AUDIO SETTINGS (Cont.)
Clock
This option in the systems menu allows you to adjust the clock on the main
screen. Hours, Minutes, AM/PM and 12/24H modes can all be selected on this
screen.
Ver.Info
This allows you to see the version numbers of the software installed in the unit.

05.- RADIO OPERATION

This section describes the operation in Radio Mode.
Enter Radio mode.
In Home Menu Press the button Radio or icon Radio.
AM1
AM 09:38
SCAN
BAND
530
KHz
SCAN
1 2 3 3 4 4 5 5 6 6
1 2
530 600 1000 1400 1600
i
Radio Media Phone MENU System Display
Band Selection
This unit has 2 AM and 3 FM bands each capable of storing up to 6 preset stations. To
change the band, simply tap the band button on screen. Each time it is tapped it will
change the band as indicated below.
AM1-AM2-FM1-FM2-FM3
Manual Tuning
Use the and the buttons on screen to adjust reception one frequency step up or
down in the current band.
Seek Tuning
Use the and the buttons to activate the seek function of the tuner. The tuner
will automatically search up or down depending on the button pressed and stop at
the first strong signal it finds in the current band.
Scan Tuning
Push the SCAN button on screen to activate the SCAN function, the SCAN icon on
the screen will flash while scanning and the unit will automatically scan the current
band stopping at each strong signal it finds for 10 seconds before resuming
scanning. Push SCAN again to disable this function.
Autoscan Presets
Push and hold the SCAN button for 3 seconds to activate the AUTOSCAN function.
When activated the unit will automatically scan the band and program the Presets 1
through 6 with the first six strong signals it finds. It will then play each new preset for 5
seconds before returning to preset 1.
1710
Tone
7