Noxon iRadio 300 Guía De Instalación Rápida página 13

1. POWER switch: This should be self-explanatory ;).
2. POWER: Connect the provided power cable to this jack.
3. LAN: For wired network operation, use this RJ45 jack.
4. LINE OUT: You can connect this 3.5 mm stereo jack to an amplifier or active spea-
kers. When this jack is occupied, the internal speakers are muted.
Here, you can connect your headphones if you want to have the
5. HEADPHONE:
sound of the iRadio 300 all to yourself. If the headphones are connected, the internal
speakers are muted.
6. SPEAKER OUT*:
into the socket, the device switches to stereo mode automatically. For the NO-
XON iRadio 360, the additional speaker is included in the scope of delivery; for
the NOXON iRadio 300, the speakers are available for purchase as options in the
TERRATEC Webshop (www.terratec.net/de/shop.html).
7. WLAN antenna: For wireless reception, you have to connect the WLAN antenna
provided here.
*Attention: Please note that a second speaker only should be connected to the
SPEAKER OUT when the device is switched off to ensure a smooth function without any
fault.
You can connect a second speaker here. If a speaker is plugged
13