Regulatory Information And Specifications - Bruno SRE-3050 Manual Del Operador

REGULATORY INFORMATION and SPECIFICATIONS

This lift is intended to be installed in accordance with the current edition of:
• EN 81-40:2008 Safety rules for the construction and installation of lifts - Special lifts for the
transport of persons and goods - Part 40: Stairlifts and inclined lifting platforms intended for per-
sons with impaired mobility
• ASME A18.1:2017 Safety Standard for Platform Lifts and Stairway Chairlifts
• CAN/CSA-B613-00 (R2012) - Private Residence Lifts for Persons With Physical
Disabilities
• ASME A17.5/CSA B44.1 - 2019 Elevator and Escalator Electrical Equipment
• NFPA 70: National Electrical Code®
• CSA C22.1 Canadian Electrical Code
Verifiy applicable local codes with the appropriate regulatory authorities.
SPECIFICATIONS
Weight Capacity:
Control:
Maximum Incline:
Seat Swivel:
Battery Charger:
The SRE-3050 Elan is NOT recommended for these type of users:
•. Those who use a scoot-pivot transfer from a wheelchair without weight bearing through their legs, whose full body
weight is placed on a single stairlift armrest.
•. Those with leg weakness, during stand to sit transfer, whose knees buckle with uncontrolled lowering
to the stairlift seat.
For the above type of users, the SRE-2010 Elite IS recommended.
COMPONENTS OF THE SRE-3050
Arm Rests
(fold up and down)
UP/DOWN
Paddle Control
Seat Swivel
Release
Circuit Breaker
with On/Off Switch
©Bruno Independent Living Aids, Inc.
4004689
300 lbs. (136 kg)
constant pressure (armrest and two remotes)
45 degrees, specials to 52 degrees
0, 67 and 90 degrees at top landing only
120VAC, 60 Hz, 0.35A input; 24VDC, 1A output, continuous monitoring
Lap Belt
®
4004689
Option: Power Swivel Seat
Folding Footrest
(with obstruction sensors)
Option: Power Footrest
4
SRE-3050 OPERATOR 01 NOVEMBER 2019
Folding, Swivel Seat
(in riding position)