English; Important - FIBARO WALL PLUG Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 13

ENGLISH

FIBARO Wall Plug is a HomeKit-enabled smart plug
®
using Wi-Fi
connection and Bluetooth
wireless technology.
This remotely controlled outlet adapter is equipped
with a power and energy metering function.
It uses a LED ring to visualize current consumption
and status.
The Wall Plug may be operated using the button on
the casing or via an iOS mobile app through Wi-Fi.
TIP: Check corresponding chapters of Quick Start
Guide for pictures.
Package contents (page 3):
• Device,
• Manuals and warranty terms.
Download FIBARO app from the App Store (page 4).
First launch (page 5):
1) Make sure your iOS mobile device is connected to
your preferred Wi-Fi network (Fig. 1).
2) Plug the accessory into a socket (Fig. 2).
3) The LED ring will be flashing yellow when ready
for configuration (Fig. 3).
4) Open the FIBARO app and tap
5) When prompted, allow the Wall Plug to connect
to your Wi-Fi network.
6) Wait until the LED ring starts flashing violet (Fig. 5).
7) Follow the onscreen instructions. Application will
guide you through the pairing process.
8) Connect the device you want to control into the
Wall Plug (Fig. 6).
Setup Code:
You will find the Setup Code on the back of the
Quick Start Guide. Remember to keep it in a safe
place. You may need it in case of re-pairing.
Reset (page 7):
1) Press and hold the button (Fig. 7).
2) When the LED ring glows yellow, release the
button.
3) Click the button again immediately to confirm.
IMPORTANT: Read the full manual before
®
attempting to use the device!
low energy
manuals.fibaro.com/en/hk-wall-plug
Specifications:
Power supply:
Power output (resistive load):
Rated load current (continuous load):
Radio protocol:
Radio frequency:
Transmit power:
Operating temperature:
Dimensions (D x H):
EU directives compliance:
Warnings:
icon (Fig. 4).
Failure to observe recommendations included in the
manual may cause risk to health or malfunction of
the device. The manufacturer, Fibar Group S.A. will
not be held responsible for any loss or damage re-
sulting from not following instructions of the man-
uals.
This product is not a toy. Keep away from children
and animals!
5
For more information about
FIBARO Wall Plug, like video
guides, parameters, technical
manuals, and declarations visit
our website:
230V AC, 50 Hz
IEEE 802.11n
®
Bluetooth
14 dBm (Wi-Fi)
RED 2014/53/EU
RoHS 2011/65/EU
2300 W
10 A
low energy
2.4 GHz
8 dBm (BLE)
0-40°C
43 x 65 mm

Publicidad

Tabla de contenido
loading

Tabla de contenido