Sartorius YDO02C-232 Instrucciones De Instalación página 27

Configuration: Signum
Operating menu overview for the "UniCOM" interface
(see also the operating menu overview in the "Configuration" section of the Signum operating manual)
Appl.
Fn key
Setup WP1
COM1
UniCOM OFF *
WP2
DATAPROT
RS-232 SBI standard version
SBI verified version (for legal metrology)
XBPI-232 *
ADC-232
RS-485 IS-485 *
ADC-485
SBI *
XBPI-232
XBPI-485
SMA
PROFIBUS Address
Appl.
Dat.
ETHERNET Source IP: 192.168.0.1 *
Source name
Listen port: 49155 *
Subnet mask: 255.255.255.0 *
Gate IP: 0.0.0.0 *
DNS IP: 0.0.0.0 *
Destination IP: 0.0.0.0 *
Destination port: 49155 *
Protocol:
Mode
Addr. 0
...
no Addr. 126 *
yes Add 34 byte application data
TCP *
UDP
SBI-SRV* 6.1.
(server) 6.1.1
6.1.2 * Manual, at stability
6.1.7
7.2.
7.2.1
7.2.2 * For other applications:
SBI-C/S 6.1.
(client) 6.1.1
6.1.2 * Manual, at stability
6.1.4
6.1.5
6.1.7
6.3.
6.3.1 * 1 display update
6.3.2
6.3.4
6.3.7
7.2.
7.2.1
7.2.2 * For other applications:
7.3.
7.3.1
7.3.2
xBPI
SMA
ModBus/TCP
Data output (manual/automatic)
Manual, without stability
Protocol printout for PC
Data output: Line format
For raw data: 16 characters
22 characters
Data output manual/automatic
Manual, without stability
Automatic, without stability
Automatic, with stability
Protocol printout for PC
Time-dependent automatic output
2 display updates
10 display updates
100 display updates
Data output: Line format
For raw data: 16 characters
22 characters
Data output: Line format
Without "+" sign
With "+" sign
27