How To Refill With Paper - BFT ESPAS 20 T Manual De Usuario

4 - HOW TO REFILL WITH PAPER

Espas20 T is fitted with a thermal printer for the issuing of entry-exit permits to car
park. Correctly insert the fanfold paper inside the device: follow these instructions to
correctly refill with tickets.
1
A
Open the printer door (point B)
Insert paper (folded by 2) and pay atten-
tion to the correct direction of insertion:
the black band must be upwards and
onwards (point C)
ATTENTION! Paper must be inserted
correctly to obtain a good print and
cutting.
3
D
At this point, the espas20 T is ready for printing.
ATTENTION! Do not use paper other than that supplied by BFT which could cause malfunc-
tion and wear and tear to electromechanical parts
espas20 T -User manual
Open the cover of espas20 completely
(point A) without disconnecting power
supply.
Close the door and printer (point D)
Insert paper in the back slot of the
printer up to automatic dragging to the
correct position.
rel. 5-2012
https://appceso.com
C
2
B
PAG. 21