Configuration Menu - BFT ESPAS 20 T Manual De Usuario

8 - CONFIGURATION MENU

The CONFIGURATION MENU holds the parameters needed to configure the device
To enter the CONFIGURATION MENU, press the PRINT key for 6 seconds.
Press the READ key to switch from one parameter to the other, and to save the latest value displayed
DISPLAY ITEM
INTERVAL: 030
amount: 0.50
READ PRINT FUNC
INTERVAL VALUE:
READ PRINT FUNC
amount value:
0.50
READ PRINT FUNC
GRACE EXIT TIME
READ PRINT FUNC
DATE AND TIME
31/12/11 11.54.45
READ PRINT FUNC
1 HOUR
2.00
READ PRINT FUNC
espas20 T - User manual
DESCRIPTION OF OPERATION
Display the structure of current tariff.
INTERVAL represents "unit of time"
AMOUNT represents "amount per unit of time"
This frame is reading-only, to switch to the following frame, press
READ.
Parameter indicating "time unit".
The value is given in minutes.
030
To increase the value press FUNC
To decrease the value press PRINT
Press READ to save the latest value and switch to the following
parameter.
Parameter indicating "amount by time unit".
The value is given in current value.
To increase, press FUNC
To decrease, press PRINT
Press READ to save the latest value and switch to the following
parameter.
Parameter indicating within which time the client must leave the
car park after payment.
The value is given in minutes.
010
To increase, press FUNC
To decrease, press PRINT
Press READ to save the latest value and switch to the following
parameter.
To change DATE and TIME of device:
- hold the PRINT key pressed until the first DATE field starts blinking.
- change with PRINT and FUNC (respectively with functions UP
and DOWN)
- save and switch to the successive value pressing the READ
key.
Press READ to save the latest value displayed, and switch to the
successive parameter.
Parameter indicating the amount of special permit "1 HR"
To increase, press FUNC
To decrease, press PRINT
Press READ to save the latest value displayed and switch to
the successive parameter.
rel. 5-2012
https://appceso.com
PAG. 26