Philips SpeechMike Classic Guía Rápida página 4

Ocultar thumbs Ver también para SpeechMike Classic:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

4 ______________________________________________ Philips SpeechMike Quick Reference Guide
3. Click Install to begin installation.
4. Remove the Driver & Utility CD and insert your Windows 98 SE or Windows ME CD.
5. Plug the SpeechMike device into the USB port. Windows will find a total of five new devices.
6. When the Add New Hardware Wizard starts, click Next.
7. On the next screen, make sure that Search for the best driver for your device. (Recommended)
is selected. Then click Next.
8. On the following screen, the only option selected should be Specify a location, and the path of the
Windows\inf folder should be displayed in the field. If necessary, uncheck all other options and click
Next.
9. Windows will now start looking for the necessary files; click Next.
Note: The required files from the Windows 98 SE or Windows ME CD can be found in the
Setup/Win98 or Setup/WinME subdirectory (respectively), browse to this directory and click OK.
10.After the first part of the installation has been completed successfully, click Finish.
11.Repeat steps 6–10 until all five SpeechMike components are installed correctly.
Attention
Using the Philips SpeechMike together with certain USB hubs on certain PCs may cause the
operating system to stop responding when the PC is started. To workaround this: unplug your Philips
USB Adapter before starting the PC and reconnect it afterwards. To solve this problem, we
recommend replacing the USB hub or connecting your Philips USB Adapter directly to the USB port
of your PC.
Some PC providers limit the output power of USB ports to 100mA (milliamps). These USB ports are
called bus-powered USB ports. Such ports may not provide enough power for some USB devices to
function properly. To resolve this issue, connect a self-powered USB hub to the USB port of your
PC, then connect the USB device via the self-powered hub.
If the LEDs and buttons of your SpeechMike do not work correctly, refer to the Readme file on the
Driver & Utility CD.
Warning
The cable of your SpeechMike can be damaged if it is kinked or if it is pulled or twisted too much. Please
handle the cable carefully to ensure the best possible performance of your SpeechMike.
For more information please refer to the User Manual on the Driver & Utility CD.

Publicidad

Tabla de contenido
loading

Tabla de contenido