Charge Your Robot - Bagotte BG800 Manual Del Usuario

Connect the round connector of the adapter into the power socket on the Charging
4
Base and the other end into a wall outlet.
Install Side Brushes
5
Attach side brushes to the bottom of
robot by pressing a brush into each slot .

3.3 Charge Your Robot

• Robot has a pre-installed rechargeable battery that has to be fully charged before use.
• Robot returns to the Charging Base at the end of a cleaning cycle or when its battery is
running low.
Method 1:
Attach Robot to the Charging Base by aligning its charging pins with the charging
pins on the base.
- Install the Charging Base in a location that Robot
can easily access. It is recommended to place the
Charging Base against a wall, and on a hard-level
surface rather than on rugs or carpets.
- Always keep the Charging Base plugged in, otherwise
Robot will not automatically return to it.
Turn on the main power switch on the
6
bottom of robot.
- 09 -
English