Parts Identification; Basic Operation - Ecco EC2015-C Manual Del Usario

Accessories:
1. AV and power supply cable.
2. Center mount bracket.

Parts Identification:

Long press 3S to turn on/o
the monitor. Short press to select
CAM channels.

Basic Operation:

Connection Diagram
Black 4 pin male for Camera 1/ Camera 2.
SIngle red wire to positive power supply of DC/12-32V.
Single black wire to GND.
Single brown wire to positive power wire of back-up light.
Single blue wire to positive power wire of left light.
Reversing Display:
1. When the blue wire is
connected to the positive wire
of the left turn light, the monitor
will automatically switch to
CAM 1 (left side camera) when
the left turn indicator is
activated.
2. When the brown wire is
connected to the positive wire
of the back-up light, the monitor
will automatically switch to
CAM 2 (back-up camera). The
distancing grid will also be
displayed.
Color LCD Screen
Brightness increase
Black 8 pin male
Press to show menus or to
select the lower setting
Brightness decrease
Red
Black
Brown
Blue
Camera
CAM1
CAM2
Page 3 of 6