Troubleshooting:
The symptoms described below do not necessarily mean a failure within the display. Please check the following items first.
Symptoms
No picture
Dark picture
No Color
No Reversing Function
Image quality symptoms
Image Shaking
No Image
Image Blurring
Image Slanting
Declaration of conformity:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Check the AV cable for proper connection. Check for loose power or ground wires.
Low ambient temperature. Color settings need adjusted in menu.
Ambient light level is low and camera is in night mode. Color settings need adjusted in menu.
Loose trigger (brown) wire. Check connection to reverse lights.
Reason
Loose pedestal bracket or mounting hardware
Poor connection or system connect cables are broken
Camera lens is dirty
Camera is not installed parallel to the ground or camera is
rotated in its mounting location
Possible Causes/Solutions
Check the connection of the monitor to the
Adjust camera mounting bracket. if the
camera is an EC2015-C, ensure the red
arrow sticker on the lens is pointing up after
camera is installed and secured
Ways to Solve
Adjust and Stabilize
camera
Clean the camera lens
Page 5 of 6