unotec CAUTIUM III Manual Del Usuario página 15

9. wifi settings tHrougH tHe explorer.
Click " " at the lower left screen. You can do some setting of camera, like audio
setting, WIFI setting, Network setting, Alarm setting, advanced setting, system setting
etc.
[Pic 26, 27, 28]
Note: Users need to use the network cable first. After setting up wifi as shown above,
plug out the network cable and use Wifi for the connection.
10. View Via Super-Client in pC
[Pic 29]
1) Open the file "P2PCLIENT.EXE" in the CD which come with camera,and
[Pic 30]
install it in your PC. It will show the icon on the desktop after finished:
[Pic 31, 32]
2) Run the software and then click:
3) Remote access video camera
[Pic 33]
Click the button, , then it shows the following:
4) Monitor interface
After you add a camera click the icon with the camera and drag the camera you just
added to one of the 4 windows to start viewing through it.
[Pic 34, 35]